Faber e-MatriX 800-I, Руководство пользователя

Страница: 9 / 24

M a n u a l e - M a t r i X 8 0 0
9
4.2 Placing the fire
For a proper functioning of the fire, always ensure that the fire is levelled.
Use the adjustable feet or the distance holder at the backside of the fire. See fig. 1.2a..
4.2.1 Floor standing
Place the fire at the right position and fix it on the wall see fig. 1.1.
4.2.2 Hanging on the wall
The fire can be hanging on the wall with the optional wall bracket see fig. 1.2a, 1.2b and
dimensional drawing in Chapter 13.6.
4.3 4.3 Installation and finishing (see fig. 1.0)
4.3.1 With cover strip “A”
Build the false chimney breast or plateau against distance holder B.
4.3.2 Without cover strip “A”
Remove distance holders B from the fire. Build the false chimney breast or plateau against
distance holder C.
4.4 Control box (see fig. 4.0)
!! Fix the Control box at an accessible location behind the service door. See Chapter 13.5 and 13.7.
4.4.1 Electric connection
• Use the supplied extension cable to connect the Control box to the Engine see fig. 4.0-B.
• Lead the DC cable, inside the Engine, to the Control box and connect it see fig. 4.0-A.
- Max. cable length from the center of the fire to the left 1,5m.
- Max. cable length from the center of the fire to the right 1,0m.
• Connect the supplied mains lead see fig 4.0-C.
If desired, a 2m extension set is available.
4.4.2 Water connection
This appliance is equipped with the following overflow protections:
o Electromechanical valve in the Control box which is sent by an overflow sensor in the
water tank.
o Absorption valve in the Engine that kicks in when the water sump has an unexpectedly
overflow see fig. 5.0-K.
• Connect all parts according flow diagram see fig. 5.0.
A = mains water F = mesh filter 1 = safety clips (11x)
B = ½ or ¾” connector G = in-line filter 2 = in-line filter brackets (2x)
C = ¼” 1m pipe H = control box 3 = elbows (4x)
D = ball valve I = ¼” 1,5m pipe
E = to be cut from ¼” 1m pipe J = e-MatriX Engine
• Place the water filters at an accessible location in correct alignment, there’s a “flow” direction
marking on both filters and Control box. See fig. 4.0.
!! Carry out a performance test see Chapter 9 and check all connections for water leakage before
placing the fuel bed and front glass.