Version 09/12 - Page 7
USE AND CARE INFORMATION
Rangehood Control Panel
All controls are located on the right side of the rangehood.
Light On/Off Switch
7KH2Q2IIVZLWFKIRUWKHÁXRUHVFHQWOLJKWLVORFDWHGEHKLQGWKH
front trim. Moving the switch to the 1 Position turns the light
On. Moving the switch to the 0 position turns the light off.
Blower Speed Switch
% LQ ),*85(
shows the speed control switch for the
blower. Moving the switch to the 1 Position turns the blower
on LOW. Moving the switch to the 2 Position turns the blower
on MEDIUM. Moving the switch to the 3 Position turns the
blower on HIGH. Moving the switch to the 0 Position turns
the blower off.
Automatic Operation
As long as the blower and light switches are on, the blower
and light will automatically operate when the visor is opened
and shut off when the visor is closed.
For Best Results
Start the rangehood several minutes before cooking to develop
SURSHUDLUÁRZ$OORZWKHXQLWWRRSHUDWHIRUVHYHUDOPLQXWHV
after cooking is complete to clear all smoke and odors from
the kitchen.
Cleaning
7KHPHWDOJUHDVHÀOWHUVVKRXOGEHFOHDQHGIUHTXHQWO\LQKRW
detergent solution or placed in the dishwasher. Clean exterior
surfaces with hot soapy water. Using abrasives and scouring
DJHQWV FDQ VFUDWFK UDQJHKRRG ÀQLVKHV DQG VKRXOG QRW EH
XVHGWRFOHDQÀQLVKHGVXUIDFHV
Replacing the Fluorescent Light
USE CAUTION AS THE BULB MAY BE HOT
7RUHSODFHWKHÁXRUHVFHQWOLJKWUHPRYHWKHGLIIXVHUFOLSVIURP
both ends of the glass diffuser
/LQ),*85(
by removing
the screws. Carefully slide the glass diffuser all the way to the
ULJKW/RZHUWKHOHIWHQGRIWKHJODVVEHORZWKHVXSSRUWÁDQJH
then remove the glass by sliding it back to the left. Replace
the diffuser glass by reversing these directions.
),*85(
L
FRONT TRIM OPTIONS
The Cristal HC comes with a white front strip installed. Optional
black and brushed aluminum strips are included in the box. To
change the front strip, remove the three phillips screws located
behind the strip
),*85(
. If necessary, the front strip can
be adjusted by loosening the three phillips screws and sliding
the strip up or down. Tighten screws when you have the strip
properly placed.
For a custom front strip, a local cabinet shop can make a strip
to match your cabinets. The front strip dimensions are given
in
),*85(
.
),*85(
1
15/32"
),*85(
3/4"
29
7/8"
or 35
7/8"
Visor
Front
Strip
Three Screws
B
