EN
2
20
AIR OUTLET – RECIRCULATION VERSION
• Unfasten the 2 screws fixing the upper bracket
7.2.1
.
• Fasten the air outlet connector
15
in its place, using the 2
screws removed as above.
• Join the Connector
15
to the Hood canopy outlet using a rigid
or flexible pipe ø150 mm, selection of which is at the
discretion of the installation technician.
• Make sure that the Activated charcoal odour filter has been
fitted.
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Fitting the Chimney
• Fix the corner element
15
to the hood canopy using the screws
12d
(2.9 x 9.5) provided.
Upper chimney
• Open the two side pieces out slightly, hook them up behind the
brackets
7.2.1
and bring them back together again until they
are in contact.
• Fix them to the sides of the Brackets using 4 Screws
12c
(2.9 x
9.5) provided.
• Make sure that the outlet from the Connector extensions is in
correspondence with the Chimney openings.
Lower chimney
• Open out the two Chimney side flaps, hook them up between
the upper chimney and the wall and then close them up again
until they touch.
• Fix the lower part to the Hood canopy at the sides, using 2
screws
12c
(2.9 x 9.5) provided.
Содержание COCKTAIL WH A80 EG8
Страница 84: ...991 0618 745_ver1 200330 D00006389_00...