9
6. Remove the spare tire lock by pressing the
clips in and pushing out. (Figure 7)
Figure 8
Figure 7
Figure 9
8. To remove the four (4) sensors: Carefully
spread the housing clips and push the sensor
out of the housing (Figure 9). With the sensor
removed, press the four (4) tabs in and push
the housing out of the bumper. Figure 10.
7. Use a 7mm socket wrench to remove the
two license plate lights from the OEM bumper.
To unplug the lights, turn the connector
counterclockwise. Figure 8.
Figure 9
***NOTE: Label each sensor
housing to insure it is placed
in the correct place when
installed into the Fab Fours
bumper.***
