Installation Instructions
GMC Canyon Premium Front Bumper
Product Number: H3450, H3451, H3452
Application: 2015-2018 GMC CANYON
Copyright 2008 Fab Fours, Inc.
Page 3 of 15
H345X_REV_A
Parts List
•
H345X replacement bumper and brackets
•
50055-HW fastener kit
•
HDLA-HW
•
4 Stud plates
•
Light kitting [i.e. 20090(2), 61737(2), 61738(2), 61675(2), 20995, 20996]
•
Instruction manual
Tools Required
•
Socket wrench with extension (ratcheting wrenches may also be
convenient)
•
7mm, 10mm, 15mm, 18mm, and ¾” sockets and box end wrenches
•
T15 torx
•
Hex key sets
•
Flat head screw drivers
•
Floor jack and wood block.
•
Tape (recommended)
II.
Removal of OEM Bumper
Note: Save all OEM parts until installation is complete!
A.
Using a T-15 TORX bit, removed 7 front inner fender bolts on each side of
the vehicle. Keep the stock hardware. The portions of the fender lining that
aren’t trimmed to fit will be bolted back into place.
B.
Unplug fog lights by reaching through the fender well lining that has been
pulled back.
