Installation Instructions
Ford Raptor Vengeance Front
Product Number: D4351, D4352
Application: 2017+ Ford Raptor
Page 7 of 9
III.
Pre-Installation
NOTE: The following installation steps apply to the installation of the front bumper.
PLEASE READ THE ENTIRE MANUAL BEFORE ATEMPTING
INSTALLATION. Ignoring these steps will increase your probability of scratching
the vehicle during product installation.
A.
Remove the bumper from the shipping carton. Lay all items out on a
blanket to prevent damage to the powder coating.
B.
If you are installing aftermarket lights, do the wiring for those now
and install them into the bumper. (But don’t plug them in until after
bumper install)
