TM2 X SW
25
A4518_6H80_Rev.A
The manual mode (wind only), or automatic mode
(wind + sun) setting has to be done by the TM2 X
TS-1 or TM2 X TS-7 remote control.
To change setting, press for at least 3 seconds the button related to the desired
function, till the motor fedback.
To change setting press the same button for at least 3 seconds till the motor
feedback.
Wind & Sun sensor
activate.
Only Wind sensor
activate.
ACTIVATING THE AUTOMATIC OR MANUAL SETTING MODE BY THE
REMOTE CONTROL SERIES TM2 X TS
TM2 X TS-1
By pressing briefly one button the display will show
the current setting.
TM2 X TS-7
By pressing briefly the button the display will show
the current setting.
Using the front buttons on the remote control do the following:
(3 sec)
or
(3 sec)
Activating
Deactivating
Activating/ Deactivating
EN
Содержание TM2 X SW
Страница 1: ...TM2 X SW ...