OPENING PROCEDURE
“Time delay” must be switched on.
Opening procedure starts when cashier enters his Secondary code.
In case the drawer is completely closed, by entering the code you can access immediately
to the first level. In case the drawer is already open at the first level cashier have to enter
the code and wait for a programmable time delay before accessing to the second level
protected part.
At the end of the time delay, begins a period called “Opening window” in which cashier can
open the drawer to the second level entering once again the Secondary code to confirm
his presence.
After a beep, cashier has 10 seconds to open the drawer.
Opening procedure can be resumed in these 2 phases :
- drawer is completely closed (access to the first level)
•
press any key to activate “Time delay”
•
enter Secondary code for opening procedure (ex.: E)
•
push slowly the drawer and then open it within 10 sec. from the beep
- drawer already open at the first level (access to the second level)
•
press any key to activate “Time delay”
•
enter Secondary code for opening procedure (ex.: E)
•
wait the time delay
•
during the “Opening window”, enter again the Secondary code
•
push slowly the drawer and then open it within 10 sec. From the beep
Service manual “SECURCASH DRAWING”
Pag 3 of 4
