FAAC MSE 110 W, Руководство пользователя, Страница: 5 / 10

11
A
B
C
D
E
TX1
TX2
RX2
RX1
TX3
RX3
5. INSTALLING THE DEVICE
5.1. TYPES OF INSTALLATION
The fixed receiver can be installed by using various solutions,
according to the type of sliding gate.
The following types of installations can be made with the help of
the accessories shown in Fig. 3:
1) The gate and pillar are on the same axis.
•
the receiver is installed directly on the pillar without any
accessory, on the wall (Fig. 4 ref. A ) or embedded (Fig. 4 ref. B).
For installation, see par.5.3.4.
•
the receiver is installed inside the coupling profile (Fig. 4 ref. C ).
For installation, see the accessory's instructions, par.5.3.5.
2) The gate and pillar are not on the same axis.
•
the receiver is installed on the Safe Beam column (Fig. 4 ref. D).
For installation, see the accessory's instructions.
•
the receiver is installed on the adjustable support (Fig. 4 ref. E).
For installation, see the accessory's instructions.
4. ACCESSORIES
3. OPERATION
The infra-red ray transmitters (TX1 and TX2), inside the sensitive
edge, communicate with the central receiver-transmitter which,
in turn, communicates with the fixed receiver (RX3).
The interruption of the light beam between emitter and receiver
on the mobile part (following impact against the deformable
profile) or the interruption of the light beam between the mobile
receiver-transmitter and the fixed receiver triggers the safety
edge.
Fig. 3
Column
SAFE BEAM
Support for
fixed receiver
Profile
for coupling
Fig. 4