![background image](http://html1.mh-extra.com/html/faac/domoswing-battery/domoswing-battery_quick-start-manual_3128200002.webp)
7
These instructions apply to the following model:
FAAC DOMOSWING
The DOMOSWING automated system can automate residential swing gates with leaves of up to 1.8 m in length with 100° max.
opening.
It consists of non-reversing electro-mechanical articulated operators, powered by 12 Vdc, and each operator is coupled to a
control unit. The non-reversing system guarantees the gate will automatically lock when the motor is not operating. A release
system enables the gate to be moved by hand in case of malfunction.
The DOMOSWING automated system was designed and built for controlling vehicle access. Do not use for any other purpose.
DOMOSWING automated system
Tab. 1
- Technical specifications of DOMOSWING operator
MODEL
DOMOSWING battery
DOMOSWING transformer
Power supply
12Vdc
Rated absorbed power (W)
48
Max static force (N)
1000
Load-free linear speed (cm./sec.)
3.2
Rod effective stroke (mm)
280
Use frequency (cycles/hour)
5
(1)
15
(2)
Consecutive cycles
~15
(1)
30
(2)
Recovery time
~10' for each completed cycle
(1)
2' for each completed cycle
(2)
Operating ambient temperature (°C)
-20 ÷ +55
Operator weight (Kg)
2,2
Protection class
IP 44
Leaf max length (m)
1,80
Leaf max weight (kg)
250
Operator overall dimensions LxHxD (mm)
see fig.2
Length of operator power cable (m)
0.7
(CANNOT BE MODIFIED)
3.
TECHNICAL SPECIFICATIONS
(1)
The 5 cycles/hour are just a reference value for maintaining full efficiency of batteries. 15 consecutive cycles can be averagely
performed with charged battery. The recovery time (battery recharge) is approx. 10' each cycle performed. The consecutive cycles
could be reduced by over 50% at low temperatures (< 0°C).
(2)
The 15 cycles/hour are just a reference value for maintaining full efficiency of motorisation. 30 consecutive cycles can be performed
with software thermal protection. Recovery time is 2' each cycle performed.
Fig. 1
Fig. 2
•
Dimensions in mm
a
DOMOSWING operator
b
Rear fitting
c
Front fitting
d
Release
e
Bracket bush
DOMOSWING
OPERATOR
1.
DESCRIPTION
2.
DIMENSIONS