FAAC DAAB EP104, Инструкция по эксплуатации

Страница: 41 / 74

DAAB STYRAUTOMATIK EP104
41
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
Automatic closing
No. Name Range Factory Setting Ref. page
C500 Automatic closing time 0.00-9.59min 0.00 27
C501 Short automatic closing time 0.0-9.9 sec 0.0 27
C510 Time for PHOTO closing when a vehicle passes 0.0-9.9 sec 0.0 28
C520 Blocking time for automatic closing after the stop
button is pressed
0.00 and 0.20-9.59
min
0.00 27
C591 Direction sensing for internal closing pulse 00 - 14 00 28
00 Disabled
01 Presence detection, signal when LOOP1 is activated, remains until LOOP1 is clear.
02 Presence detection, signal when LOOP2 is activated, remains until LOOP2 is clear.
03 Presence detection, signal when both LOOP1 and LOOP2 are activated, remains until either LOOP1
or LOOP2 is clear.
04 Presence detection, signal when PHOTO is activated, remains until PHOTO is clear.
05 Presence detection, signal when both PHOTO and LOOP1 are activated, remains until either
PHOTO or LOOP1 is clear.
06 Presence detection, signal when both PHOTO and LOOP2 are activated, remains until either
PHOTO or LOOP2 is clear.
07 Presence detection, signal when PHOTO, LOOP1 and LOOP2 are activated, remains until either
PHOTO, LOOP1 or LOOP2 is clear.
08 Presence detection, signal when either LOOP1 or LOOP2 is activated, remains until either LOOP1 or
LOOP2 is clear.
09 Presence detection, signal when first LOOP1 and then LOOP2 are activated, remains until LOOP2 is
clear.
10 Presence detection, signal when first LOOP1 and then PHOTO are activated, remains until PHOTO
is clear.
11 Presence detection, signal when first LOOP2 and then LOOP1 are activated, remains until LOOP1 is
clear.
12 Presence detection, signal when first LOOP2 and then PHOTO are activated, remains until PHOTO
is clear.
13 Presence detection, signal when first PHOTO and then LOOP1 are activated, remains until LOOP1 is
clear.
14 Presence detection, signal when first PHOTO and then LOOP2 are activated, remains until LOOP2 is
clear.