FAAC DAAB EP104, Быстрый старт

Страница: 6 / 12

Page | 5
Configuring the EP104
Before starting programming of the EP104, it is best to familiarize yourself with navigating through the menus. The
EP104 display can show a value up to 4 digits long, or a channel number with the prefix C, d, F, L, o, P, or r followed
by 3 digits. If an E appears followed by a 3-digit number, this is an Error message (please refer to Error Messages in
the main manual on page 53). Please note that on first power up, the display will show EP-1 or EP-2 which is
identifying if this a unit design for one or two motors, respectively.
Please study the below, which explains the process.