FAAC APN, Руководство пользователя

Страница: 9 / 13

8
x 4
x 4
x4
x4
30
30

ENGLISH
2. INSTALLATION ON MOBILE LEAF
Drill the holes on the external upright of the mobile leaf, using
the supplied template as shown in fig. 7, and then secure
the anti-panic hinge and the slide unit, using the supplied
screws (fig. 8).
Insert the top profile on the hinge; next, insert the leaf
adjustment block in the profile as shown in fig. 0, and fit
the three supplied dowels.
Use profiles with the internal section of the
upright at least 30x30 mm, to enable the
anti-panic hinge and the slide to be housed
internally.
Anti-panic hinge bush
Insert the mobile leaf release unit in the top profile, as
shown in fig. and provisionally fasten the screws,
ref.

.
securing dowel
Cut the top profile by a length L equal to
the width of the leaf less 10 mm (to create
housing for the 2 closing plugs).
L = Leaf width - 0