FAAC A952, Руководство пользователя, Страница: 21 / 94

A952 19 532310 - Rev.A
2
1. Decide the direction in which to install of the plate,
considering the position of the gearmotor accord-
ing to the type of application (refer to

1-

7).
2. Drill the holes for the support plate and arm by
referring to the installation diagram for the spe-
cific application (

1-

7).
L
In some cases, the measurements may vary according
to the width of the leaf and/or the depth of the door-
post. Refer to the tables in the installation diagrams
for the correct value to use.
3. Secure the plate using the anchors provided
according to the type of material, as indicated
above. The plate should be installed with the
smooth side resting against the mounting sur-
face (
2
) .
3.4 TYPES OF INSTALLATION
The A952 offers several installation options:
A. On the architrave
B. On the leaf
C. With an articulated arm
D. With a shoe arm
E. With CLOSING SPRING
System not powered:
The door is opened manually by counteracting the
force of the spring (which becomes loaded).
When the door is released, it is closed by the spring,
which decompresses.
F. With OPENING SPRING
System not powered:
The door is closed manually, counteracting the effect
of the spring (which becomes loaded).
When the door is released, it is opened by the spring,
which decompresses.
The various installation options and the relative
mounting positions are shown in the following
diagrams.
The title of each diagram indicates the
9t
parameter
setting in on-board programming for the specific
application.
Each diagram shows the installation on the right
door and left door.
The orientation of the support plate is indicated by
the position of the icon .
The following icons, located in the corners of the
diagrams, indicate respectively:
1.
Opening in the direction opposite to the side on
which the operator is mounted.
2.
Opening in the direction of the side on which the
operator is mounted.