background image

To the original purchaser only: 

FAAC International, Inc., warrants, for twenty-four 
(24) months from the date of invoice, the gate 
operator systems and other related systems and 
equipment manufactured by FAAC S.p.A. and 
distributed by FAAC International, Inc., to be free 
from defects in material and workmanship under 
normal use and service for which it was intended 
provided it has been properly installed and 
operated.
FAAC International, Inc.’s obligations under 
this warranty shall be limited to the repair or 
exchange of any part of parts manufactured 
by FAAC S.p.A. and distributed by FAAC 
International, Inc. Defective products must 
be returned to FAAC International, Inc., freight 
prepaid by purchaser, within the warranty 
period. Items returned will be repaired or 
replaced, at FAAC International, Inc.’s option, 
upon an examination of the product by FAAC 
International, Inc., which discloses, to the 
satisfaction of FAAC International, Inc., that the 
item is defective. FAAC International, Inc. will 
return the warranted item freight prepaid. The 
products manufactured by FAAC S.p.A. and 
distributed by FAAC International, Inc., are not 
warranted to meet the specific requirements, 
if any, of safety codes of any particular state, 
municipality, or other jurisdiction, and neither 
FAAC S.p.A. or FAAC International, Inc., assume 
any risk or liability whatsoever resulting from 
the use thereof, whether used singly or in 
combination with other machines or apparatus. 
Any products and parts not manufactured 
by FAAC S.p.A. and distributed by FAAC 
International, Inc., will carry only the warranty, if 
any, of the manufacturer. This warranty shall not 
apply to any products or parts thereof which 
have been repaired or altered, without FAAC 
International, Inc.’s written consent, outside of 
FAAC International, Inc.’s workshop, or altered 
in any way so as, in the judgment of FAAC 
International, Inc., to affect adversely the stability 
or reliability of the product(s) or has been subject 
to misuse, negligence, or accident, or has 
not been operated in accordance with FAAC 
International, Inc.’s or FAAC S.p.A.’s instructions 
or has been operated under conditions more 
severe than, or otherwise exceeding, those set 
forth in the specifications for such product(s). 
Neither FAAC S.p.A. nor FAAC International, 
Inc., shall be liable for any loss or damage 
whatsoever resulting, directly or indirectly, from 
the use or loss of use of the product(s). Without 

limiting the foregoing, this exclusion from liability 
embraces a purchaser’s expenses for downtime 
or for making up downtime, damages for which 
the purchaser may be liable to other persons, 
damages to property, and injury to or death of 
any persons. 
FAAC S.p.A. or FAAC International, Inc., neither 
assumes nor authorizes any person to assume 
for them any other liability in connection with 
the sale or use of the products of FAAC S.p.A. 
or FAAC International, Inc. The warranty herein 
above set forth shall not be deemed to cover 
maintenance parts, including, but not limited to, 
hydraulic oil, filters, or the like. No agreement to 
replace or repair shall constitute an admission 
by FAAC S.p.A. or FAAC International, Inc., of any 
legal responsibility to effect such replacement, 
to make such repair, or otherwise. This limited 
warranty extends only to wholesale customers 
who buy directly through FAAC International, 
Inc.’s normal distribution channels. FAAC 
International, Inc., does not warrant its products 
to end consumers. 
Consumers must inquire from their selling dealer 
as to the nature and extent of that dealer’s 
warranty, if any. This warranty is expressly in lieu 
of all other warranties expressed or implied 
including the warranties of merchantability and 
fitness for use. This warranty shall not apply to 
products or any part thereof which have been 
subject to accident, negligence, alteration, 
abuse, or misuse or if damage was due to 
improper installation or use of improper power 
source, or if damage was caused by fire, flood, 
lightning, electrical power surge, explosion, wind 
storm, hail, aircraft or vehicles, vandalism, riot or 
civil commotion, or acts of God.

  LIMITED WARRANTY

Содержание 770 COMPACT

































Отзывы: