Set temporary password
1. Press
OK
OK
. Unlocking indicator light will flash.
2. Enter the new passcode consisting of between 4-15 digits.
3. Press
OK
OK
to unlock and a long beep will sound to indicate temporary passcode has been set.
NOTE:
If Unlocking indicator light flashes once every 3 seconds indicates the passcode has already be taken.
Temporary passcodes can only be used once.
3. Turn off public mode
1. Enter current Management Pa
OK
OK
, a long beep will sound and Unlocking indicator light will be
displayed
2. Press
OK
OK
for at least 2 seconds, Unlocking indicator light will flash. Press
OK
OK
again.
3. Input “4 3” and press
OK
OK
. When you hear a long beep public mode has been set.
4. Turn on/off Fake Pin code function
1. Enter current Management Pa
OK
OK
, a long beep will sound and Unlocking indicator light will be
displayed.
2. Press
OK
OK
for at least 2 seconds, Unlocking indicator light will flash. Press
OK
OK
again.
3. Enter “4 2” then press
OK
OK
, If you hear a long beep sound, Fake Pin code mode has been turned on.
Enter “4 1” then press
OK
OK
, If you hear a long beep sound, Fake Pin code mode has been turned off.
Page 2
Order online at
www.faparkes.co.uk
Your One-Stop-Shop for all your hardware requirements!
1. If the passcode has been forgotten, you can get the decode number by providing the code on the lock body to the
distributor to decode.
The passcode will be changed back to the original management passcode 4321 , user passcode 1234.
When the user passcode been forgotten, you can input the master passcode.
The user passcode will be changed back to the original user passcode.
2. Introduced with Anti-Theft Technology and Fake PIN passcode function; you can input any code(s) before or after
the real passcode to prevent the real passcode being peeped. Maximum 16 digits
3. Auto-alarm will be activated when input wrong password 4 times and the lock will be died for 60 seconds.
4. Automatic power shortage prompts (When lock show this signal The lock cannot be operated when the voltage is
very low
5. Equipped with 3V Cr2032 batteries, last password will not be lost after changing the battery.
Featuring
Anti-Theft Technology
and
Fake PIN
passcode function you can input any code(s) (maximum of 16 digits)
before or after the real password to prevent the real password being seen.
TROUBLESHOOTING
FEATURES
Problem
Primary cause
Resolution
When entering the passcode, alarm beeps twice while flashes once. Power is too low.
Replace batteries.
When entering the passcode, alarm beeps while is displayed and lock
cannot be opened.
Knob is in incorrect
position.
Turn knob to correct
position.
Pressing keypad but no sound. Lock can be opened.
Buzzer is damaged/
broken.
Replace buzzer.
