5
This User’s Manual describes the specifications and so on between connectors and the terminal block
conversion modules used in combination with Mitsubishi Electric Corporation DC I/O modules.
Item Specifications
Operating
Surrounding air
temperature
0 to 55
°
C
Storage ambient
temperature
-25 to 75
°
C
Operating ambient
humidity
5 to 95% RH, no condensation
Storage ambient
humidity
5 to 95% RH, no condensation
Compliant
standards
JIS B 3502, IEC61131-2
Frequency
Acceleration
Amplitude
Sweep
count
10 to 57Hz
―
0.075mm
Under
intermittent
vibration
57 to 150Hz 9.8m/s
2
(1G)
―
10 times each in X, Y,
and Z axis directions
10 to 57Hz
―
0.035mm
Vibration resistance
Under
continuous
vibration
57 to 150Hz 4.9m/s
2
(0.5G)
―
―
Shock resistance
Conforms to JIS B 3502 and IEC61131-2 (147m/s
2
(15G),
3 times each in X, Y, and Z axis directions)
Operating
atmosphere
There should be no corrosive gases.
Operating
altitude
(* 1)
2,000m or lower
Installation location
Inside control panel
Overvoltage
category
(* 2)
II
or lower
Pollution level
(* 3)
2 or lower
* 1: Do not use or store in a pressurized environment greater than the atmospheric pressure at an altitude
of 0m.
* 2: Indicates how an assumption has been made on the point at which the devices are connected from
the public power grid to the machinery and equipment inside the facilities.
* 3: This is a guideline indicating the extent to which conducting substances are found in the environment
in which the devices are used.
1
．
INTRODUCTION
2
．
GENERAL SPECIFICATIONS
