F5 BIG-IP 3900, Руководство пользователя

Страница: 24 / 48

3. Align the rear portion of the inner rails to the black plastic alignment pins.
4. Slide the unit into the rack, fitting the inner rails attached to the unit to the outer rails attached to the rack, and continue
sliding the rail to the fully-closed position.
Note: If the rail stops suddenly or locks, press the levers on the inner rail to enable the rails to slide into the
fully-closed position.
5. Move the unit in and out of the rack to settle the slide operation.
6. Ensure that all screws and Keps (or wing) nuts are properly tightened.
7. Secure the rail lock brackets on each side of the unit to the rack using either screws provided with the rack or one
of the 5/8 inch rail lock screws provided with the kit per side.
22 | Platform Guide: 3900