manualshive.com logo in svg

F5 6900, Руководство по платформе

Поделиться
Скачать
F5 6900 Скачать руководство пользователя страница 41

Using Additional 6900/8900 Platform Functionality

Platform Guide: 6900 and 8900

4 - 1

Understanding indicator LED behavior

It helps to understand the indicator LED behavior of the BIG-IP software, 
on the 6900/8900 platform.

Indicator LED behavior

The appearance and behavior of each LED indicate the status of the system. 
Table 4.1 defines the indicator LED behavior.

Standard operating states

When the system is in a standard operating state, the status and alarm LEDs 
appear and behave in a specific manner. Table 4.2 defines the standard 
operating states for the status and alarm LEDs.

Appearance

Description 

Off (none)

The LED is not lit and does not display any color.

Solid

The LED is lit and does not blink.

Blinking

The LED turns on and off at a regular frequency.

Intermittent

The LED turns on and off with an irregular frequency 
and may sometimes appear solid.

Table 4.1  

Indicator LED behavior

LED

State

Description

Status

off

No main (non-standby) power.

green

System is running in normal mode.

yellow

System is running in an impaired mode.

The condition is not considered significant enough 
register as an alarm.

Alarm

off

No alarm conditions exist.

red

Severe alarm–system is not running.

The condition is possibly damaging to the system.

yellow

Non-severe alarm–system is running improperly.

The condition is not considered to be damaging to the 
system.

Table 4.2  

Standard operating states of the status and alarm LEDs

Содержание 6900































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды