F5 6900, Руководство по платформе

Страница: 26 / 126

Chapter 2
2 - 6
Figure 2.3 An inner rail installed onto a unit
To attach the inner rails to the unit
1. Separate the inner rail from the outer rail.
2. Align the large holes in the inner rail with the pins on the unit and
then push toward the back of the unit to lock the pins to the inner
rail, as shown in Figure 2.3.
If you need to remove the inner rail from the side of the unit, press
the spring clip located on the first pin, pull the inner rail away from
the pin, and then remove the inner rail from the unit.
3. Attach the rail mount lock brackets to each side of the unit using the
included screws, as shown in Figure 2.4.
Figure 2.4 Rail mount lock bracket installed onto a unit