WARRANTY CERTIFICATE
Dear customer:
General Warranty Information:
Conditions:
fully filled
Congratulations on your purchase of this F1 Electrónica product. All our
products undergo rigorous quality tests. However, if the product features
any kind of defect, please address your installer urgently, who will make
the necessary checkups or will intervene as necessary.
This product is warranted by F1 Electrónica for a period of 12
(twelve) months from the date of installation. Defects in manufacturing and
materials, as well as defects in everything related to the good operation of
the equipment will be covered. Should the product be defective during the
warranty period, F1 Electrónica will repair or replace the defective parts.
Shipping expenses will be borne by the addressee.
Components or accessories not manufactured by F1 Electrónica
will be covered only by the warranties of their respective manufacturers.
This warranty is the only one provided by F1 Electrónica. Therefore, any
other warranty is excluded.
F1 Electrónica shall assume no liability for any damage against
individuals or things resulting from product misfunction, except in the
event of gross deceit or intent. This warranty will be valid only for those
who are not late in payments.
This warranty will only be valid if this certificate is submitted,
which shall be
in, and, enclosed, if necessary, to the purchase
receipt. F1 Electrónica may refuse to recognize this warranty if it is
incomplete or false. This warranty will only be valid if the product was in
good operating conditions at the moment of purchase and its packaging,
intact, as F1 Electrónica is the only one that may warranty its origin
.
3
ENGLISH
10
ENGLISH
[ PARA ENTREGAR AL USUARIO ]
Technical Features.
F1 Electrónica S.R.L. shall assume no liability for any damage
caused to individuals or things resulting from the manipulation of
the product by third parties not authorized to that effect.
Features
Max.
Tip.
Min.
Unit
Input voltage.
(V+)
Input voltage.
(V+)
15
Current in GAS
output. (Ig)
Current in GAS
output. (Ig)
Current in PETROL
output. (In)
Current in PETROL
output. (In)
Fuse as in DIN 72581
Standards.
Fuse as in DIN 72581
Standards.
Height
Width
Length
13.8
10
VOLT
5
--
--
AMPER
5
--
--
AMPER
5
--
--
AMPER
22,5
--
--
mm
39
--
--
69
--
--
mm
mm
Troubleshooting: Common Symptoms & Solutions
Symptom
Solution
The change-over switch is
not working.
V
Check that the ORANGE cable has +12V with vehicle’s ignition
switch on, and that BLACK cable is properly connected to Ground.
V
Check condition of the 5-Amper fuse in electrical installation
If the change-over switch
is in the GAS position, the
vehicle starts but, after 3
seconds approx,it stops.
V
Check that the coil negative signal (RED cable) is well
received.
The change-over switch is
not working properly.
V
V
Check that the electrical installation is far from the high voltage
cables.
Check that the electrical connections are properly welded and
isolated.
