ATR833A-II / P/N 833-II (Axxx)-(Axxx)
Operation and Installation
15
Doc.-No. 01.143A.010.71e / Revision 1.00
2.4.5 Storage of a Frequency into the User Memory
The active frequency can be stored into any entry of the user memory.
This is achieved by a long press of 1,5 seconds on
MEM.
The previous
memory entry will be be overwritten.
The following example stores the frequency 124.350 MHz of KONSTANZ
(EDTZ) into the user memory 7:
Step
Display (example)
1. Tune in frequency:
Have frequency to be stored set
as standby frequency
ACT
118.275
SBY
124.350
VOL 05
2. Enter memory list:
With a long press on
MEM
the
frequency can be stored to the
user memory.
ACT
118.275
SBY
124.350
MEM saveTo
1
3. Select memory position:
Selection of the decided memory
position with
VOL/SEL
ACT
118.275
SBY
124.350
MEM saveTo
7
4. Overwrite the selected memory :
With a
short press
of
MEM
the
standby frequency is stored at the
selected position.
A
preceding
>
shows
the
successful storage to the memory
position.
ACT
118.275
SBY >
124.350
MEM
7
To exit the frequency list, press
DW
or wait 10 seconds until time-out.
To every frequency entry a name can be assigned with up to 8
characters, which is shown right of the entry.
