F.u.n.k.e. ATR833-II, Эксплуатация и установка, Страница: 13 / 56

ATR833-II / P/N 833-II (Cxxx)-(Cxxx)
Operation and Installation
Doc.-No. 01.143.010.71e / Revision 1.01 12
The swap button interchanges the newly set standby frequency and
the former active frequency.
When having the channel selection configured for 8.33 kHz steps (see
0), the frequency is input in three steps:
SBY 118.910
SBY 118.910
SBY 118.910
2.4.3 Recall a Frequency from the User Memory
To access the user memory frequency list, press MEM once, and select
one of the 20 memory entries with the VOL/SEL turn knob.
The selected memory entry is shown instead of the standby frequency.
In the lower row of the display, the number of the memory entry selected
is indicated by [MEM xx] (with xx = 1 to 20); if a name has been
provided by the user for this memory entry, it is displayed next to the
memory entry number.
ACT 123.450
SBY
118.275
E 2
Range: 01 - 20
In order to speed up the entering of new frequencies, it is
possible to configure the radio to allow entering of those
frequencies only that are used with 25 kHz channel width.
Please refer to chapter 3.1 for information on this
configuration.
However, when choosing this option, please keep in mind to
re-enable 8.33 kHz channel selection before flying into areas
where 8.33 kHz channels are used.