F.u.n.k.e. ATR833-II-BOX, Руководство пользователя

Страница: 9 / 16

ATR833-II-BOX / P/N 833-II-(Mxxx)-(Mxxx)
Operation and Installation
9 Doc-No. 01.143M.010.71e
Data Byte # Description Possible Values / Remarks
1 MHz
118…136
2 kHz / 5
0…198 (corresponds to 0…990 kHz)
The standby frequency and the active frequency can also be adjusted by
Garmin devices. The protocol corresponds to the Garmin GTR225.
Document 01.142.090.36 ATR833S/-II Remote Protocol Description
provides a complete description of the interface.
Note
The complete description of the ATR833S/-II Remote Protocol is
available on request.
5 INSTALLATION
5.1 Advice and Tips
Following recommendations shall be considered before installation:
- Select a position away from heat sources. Care for adequate
convection cooling.
- Leave sufficient space for the installation of cables and connectors.
- Avoid sharp bends and wiring close to control cables.
- Leave sufficient lead length for inspection or repair of the wiring of the
connector.
- Bend the harness at the rear connectors to inhibit water droplets
(formed due to condensation) from collecting in the connector.
- The ATR833-II Box is fixed front-laterally in the mounting tray with four
4x8mm screws.
Warning
No screws may be turned in more than max. 15mm into the device
–
even if no hard limit is noticeable!