F.F. Group CID 12V/80 PLUS, Оригинальное руководство пользователя

Страница: 7 / 72

POWER TOOL USE AND CARE
f
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
f Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be re-
paired.
f
Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
f Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
f Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power
tools.
f Keep cutting tools sharp and clean. Prop -
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
f Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
f Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
f Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
f When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
f Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additional-
ly seek medical help. Liquid ejected from
the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is main-
tained.
SAFETY INSTRUCTIONS FOR CORDLESS
IMPACT SCREWDRIVER
f Avoid damage that can be caused by
screws, nails and other elements in your
workpiece; remove them before you
start working.
f Always check that the supply voltage is
the same as the voltage indicated on the
nameplate of the charger.
f Switch off the power tool immediately
when the tool insert jams. Be prepared
for high reaction torque that can cause
kickback. The tool insert jams when:
ƒ
the power tool is subject to overload or
ƒ
it becomes wedged in the workpiece
f Use only accessories with an allowable
speed matching at least the highest no-
load speed of the tool.
f The tool/charger is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the tool/charger by a person re -
English | 7
www.ffgroup-tools.com
CID 12V / 80 PLUS