F.F. Group 44 826, Оригинальное руководство пользователя

Страница: 8 / 64

GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instruc -
tions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future refer-
ence. The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
WORK AREA
f
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
f
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq -
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
f
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose con -
trol.
ELECTRICAL SAFETY
f
Power tool plugs must match the outlet. Never mod -
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of elec -
tric shock.
f
Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refriger-
ators. There is an increased risk of electric shock if
your body is earthed or grounded.
f
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
f
Do not abuse the cord. Never use the cord for carry -
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the risk of
electric shock.
f
When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
f
If operating a power tool in a damp location is un-
avoidable, use a residual current device (RCD) pro -
tected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
f
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the influ -
ence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
f
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will re-
duce personal injuries.
f
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source, picking up or carrying the tool. Carrying
power tools with your finger on the switch or ener -
gizing power tools that have the switch on invites
accidents.
f
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
f
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f
Dress properly. Do not wear loose clothing or jewel -
ery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelery or long hair
can be caught in moving parts.
POWER TOOL USE AND CARE
f
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
f
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
f
Disconnect the plug from the power source from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of start -
ing the power tool accidentally.
f
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
f
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f
Keep cutting tools sharp and clean. Properly main -
tained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
f
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a haz -
ardous situation.
SERVICE
Have your power tool serviced by an authorized ser -
vice and use only original spare parts. This will ensure
that the safety of the power tool is maintained.
SAFETY WARNINGS FOR ANGLE GRINDER
SAFETY WARNINGS COMMON FOR GRINDING,
SANDING, WIRE BRUSHING OR ABRASIVE CUT-
TING OFF OPERATIONS
f
This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety
warnings, instructions, illustrations and specifi -
cations provided with this power tool. Failure to
follow all instructions listed below may result in
ENGLISH
| English 8 AG 125/1100E PRO | AG 125/1200EC PRO