6.
Now test your trailer’s electric braking system. Connect your 7 pin plug to your tow
vehicle.
7.
Ensure your vehicle’s control unit is switched on. Have someone engage the brakes on
the tow vehicle – whilst the car is stationery.
8.
The second person goes to the trailer wheel and listens for a humming noise. No
humming noise – means that the brakes are not yet connected – follow step 1 to 7
again to ensure correct fitment.
9.
Now follow brake controller instruction manual for correct setup of your controller and
test as per their recommendations.
Water tank:
Your water tank is brand new and needs to be cleaned and flushed before use.
Before first use – please fill you tank with 30 or so litres of water and 5 to 10ml of vanilla essence.
This will help to take any smells and tastes from the water tank. Let this sit for a day or two and
then flush out. We recommend that before each trip – you flush your tank and refill with fresh
water.
4 Stove Burner:
Connect the water and gas as shown (A). Both have click and twist connectors. To switch on the
stove, simply turn the flame regulator counter-clockwise while pushing down (B); the clicking
noise stops when the flame is activated. First time might take a while as gas travels from the
trailer front. Make sure gas bottle and gas line regulator are open. To replace the battery of the
stove, you simply lift the stove out of its frame. The battery box contains 1x Type D battery (C).
Caution:
Cleaners that use bleach as an ingredient should not be used. Bleach can cause fading and lead
to damage of the canvas fabric, the stitching and the waterproofing.
The pole joiners within the poles are provided for easy assembly of the frame. The pole joiners
are not required for any structural reason and the poles perform perfectly well without the pole
(A)
(A)
(B)
(C)
6
Содержание STIRLING GT
Страница 2: ......
