Ezytrail Parkes 13 Скачать руководство пользователя страница 12

Страница: 12 / 40

BRAKES AND HANDBRAKE

CORRECT USE OF YOUR ELECTRIC BRAKES

Your trailer brakes are designed to work in synchronisation with your tow vehicle brakes.

Never use your tow vehicle or trailer brakes alone to stop the combined load. Your trailer and tow vehicle will

seldom have the correct amperage flow to the brake magnets to give you comfortable, safe braking unless

you make proper brake system adjustments. Changing trailer load and driving conditions, as well as uneven

alternator and battery output, can mean unstable current flow to your brake magnets.

It is therefore imperative that you maintain and adjust your brakes as set forth in the controller manual, use a

properly modulated brake controller and perform the synchronisation/adjustment procedure recommended by

the brake controller supplier.

IMPORTANT SAFETY NOTICE

Proven and in some cases approved service methods and correct repair procedures are

essential for the safe, reliable operation of the brakes, suspension and axles as well as

the personal safety of the individual doing the work.

The numerous variations in procedures, techniques, tools and parts for servicing axles, as

well as in the skill of the individual doing the work will determine outcomes. This manual

cannot possibly anticipate all such variations nor provide advice or cautions as to each.

Accordingly, anyone who departs from the instructions provided in this manual must first establish that they

neither compromise their personal safety nor the vehicle integrity by their choice of methods, tool’s or parts.

*IF AT ALL IN DOUBT PLEASE REFER ALL REPAIRS AND MAINTENANCE TO A SUITABLY QUALIFIED OR

EXPERIENCED MECHANICAL REPAIRER.
*EZYTRAIL CAMPERS ACCEPTS NO LIABILITY FOR PERSONAL INJURY, LOSS OR DAMAGE RESULTING FROM

INCORRECT APPLICATIONS, METHODS AND FAILURE TO PERFORM MAINTENANCE SAFELY AND CORRECTLY.

BRAKE ADJUSTMENT

Brakes should be adjusted:

after the first 500km of operation when the brake shoes and drums have “burnished”

at no more than 10,000km intervals.

or as use and performance requires.

Never crawl under your trailer unless it is resting on properly placed jack stands. Do not

place supports on any part of the suspension system and use the designated jack point or

under the spring base plate to jack trailer.

BRAKE CLEANING AND INSPECTION

Your trailer brakes must be inspected and serviced at 10,000km or more often as required by use and

performance. Magnets and shoes must be changed when they become worn or scored to avoid inefficient

vehicle braking.

BRAKE LUBRICATION

This should only be done by qualified persons.

CAUTION - DO NOT GET GREASE OR OIL ON THE BRAKE LININGS, DRUMS OR MAGNETS.

PARKES SERIES

Содержание Parkes 13









































Результаты поиска

Содержание Parkes 13

Отзывы:

Похожие инструкции для Parkes 13

Бренды по названию

Популярные бренды

Ezytrail Parkes 13, Руководство пользователя

Результаты поиска

Содержание Parkes 13

Отзывы:

Похожие инструкции для Parkes 13

Бренды по названию

Популярные бренды