➔
Do not commence installation until you have read and understood the instructions
and warnings contained in this installation sheet. If you have any questions regarding
any of the instructions or warnings, please contact your place of purchase.
➔
This mounting bracket was designed to be installed and utilised ONLY as
ed in this manual. Improper installation or use of this product may
cause damage or serious injury.
➔
This product should only be installed by someone of good mechanical ability,
with basic building experience and full understanding of this manual.
➔
Make sure that the supporting surface (i.e. wall) will safely support the combined
load of this bracket and all attached hardware (TV) and components.
➔
If mounting to timber wall studs, make sure that the mounting screws are
nder is highly recommended.
➔
Always use an assistant or mechanical lifting equipment to safely lift
and position equipment.
➔
rmly, but do not over tighten. Over tightening can cause damage,
greatly reducing their holding power.
➔
This product is intended for indoor use only. Using this product
outdoors could lead to product failure and personal injury.
WARNING
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior
to installation. If any parts are missing or faulty, contact your local distributor for assistance.
Wall plate (x1)
A
ST6.3x55 (x4)
W-A
Concrete anchor (x4)
W-B
D8 washer (x4)
W-C
Adapter bracket (x2)
B
Safety bar (x1)
C
NOTE: Please read the entire instruction manual before you start
installation and assembly
Component Checklist
SLT-400 manual.indd 2-3
10/08/12 1:29 PM
