www.ezwatchstore.com
To exit playback and return to the ‘search’ screen, press the Stop (up) button. To exit the search
screen and return to the menu, press the ‘Menu’ button, select ‘Exit’, and hit Menu once more.
External Copy/Recording –
To make a copy of video that was taken by the camera,
you must connect the camera to an external recorder. This is most commonly going to be a
VCR or Digital Video Recorder (DVR). Plug the camera into the VCR and switch your VCR and
TV input until you can see the camera image on the screen (See your VCR manual for
instructions on how to do this). Insert a blank tape, and press ‘Record’ on your VCR. Then play
back the recording you wish to make a copy of using the EZ-EYE unit. As the camera plays the
recording, the VCR will copy it onto tape. Once you are done, stop the VCR.
Power Operation –
The camera is designed to operate using two power modes – Direct
power, and Battery Power. To operate the unit in Direct Power, connect the 12V DC power
supply (included) to a wall outlet. Then plug the other end into the camera. The Camera can be
on and recording indefinitely (so long as power is connected).
The other method is using 4x AA batteries. Using standard Alkaline batteries, the system can
run for a full 8 hours on battery power. Using Heavy Duty or lower quality batteries can severely
decrease battery life with these units. Alkaline or Lithium batteries are HIGHLY recommended.
NOTE – The unit cannot operate in both modes at once. If you connect power while the
batteries are present, the unit WILL continue to drain the batteries over time.
Quality Comparison –
Image taken from ~5 feet from target.
640x 480 resolution, ‘High’ recording quality : 320 x 240 resolution, ‘Low’ recording quality
