3
Add Device
The smart button should be used along with EZVIZ Zigbee Smart Gateway (afterinafter
referred to as "gateway"). Please add gateway to the EZVIZ cloud by referring to the gateway
user manual, and then add the smart button to the gateway.
1. Method One: Add by Scanning QR Code
1. Connect your phone to Wi-Fi.
2. Log in to your account through EZVIZ app.
3. Tap the device adding icon, and then the QR code scanning interface will be
displayed.
4. Scan the QR code on the inner side of the cover or on the user manual.
Scan QR Code
5. Add the smart button to the gateway by following the wizard on the app.
6. Align the cover detaching convex with the cover detaching groove as shown
in the figure below. Rotate the cover clockwise to tighten cover.
2. Method Two: Add by the Gateway
When adding device by the gateway, place the device as close to the gateway as possible.
1. Make the gateway enter device adding mode as instructed by the user
manual of the gateway
2. Press and hold the RESET button for over 5 seconds until the indicator on
the smart button turns fast-flashing blue, and the smart button enters adding
mode.
3. The smart button will be added to the gateway automatically.
4. Align the cover detaching convex with the cover detaching groove as shown
in the figure below. Rotate the cover clockwise to tighten the cover.