background image

Installation Preparation

Camera Overview

Make sure that the device in the package is in good condition and all the assembly 
parts are included.

Make sure that all the related equipment is powered off during the installation.
Check whether the power supply matches your power output to avoid damage.
Make sure the wall is strong enough to withstand three times the weight of the 
camera and the mounting.
If the wall is cement, you need to insert expansion screws before you install the 
camera.
If the wall is wooden, you can use self-tapping screws to secure the camera.
If the product does not function properly, please contact us at 1-855-MYEZVIZ 
(693-9849) or email us at service

@

ezvizlife.com. 

Do not disassemble the camera for repair or maintenance by yourself.

Installation

ENGLISH

Screw hole

3-1

3-2

3-3

360°

90°

360°

3

2
1

1. 

Place the drill template sticker on the surface where the camera will be mounted.

2. 

Drill the screw holes according to the drill template, see figure 3-1.

3. 

Route the camera cables through the mounting base and wire the cables 

through the side opening.

4. 

Fix the mounting base to the ceiling or wall with PA4×25 screws (supplied), see 

figure 3-2.

5.

 

Adjust the surveillance angle, see figure 3-3.

- Loosen the No. 3 adjusting screw to adjust the panning position (0° to 360°).
- Tighten the No. 3 screw after adjusting.
- Loosen the No. 2 adjusting screw to adjust the tilting position (0° to 90°).
- Tighten the No. 2 screw after adjusting.
- Loosen the No. 1 adjusting screw to adjust the azimuth angle of the image (0° 

to 360°). 

- Tighten the No. 1 screw after adjusting.

Mounting Base

Sun Shield

IR LED

Lens

Power Cable

HD Video Cable

Side Opening

6. 

Connect the camera cables and finish installation.

UD.6L0208A0024A01

Отзывы: