Installaon Guide
Smart Wireless Video Doorbell SH343
BRIEF TECHNICAL SPECS
Resoluon
1280 * 720
Storage 8G/16G/32G
View Angle
166 deg
Infrared Light—6 LED lights / 850mm
Wi-Fi
Supports 802.11 b/g/n
Recording—to TF card (not supplied)
Ba7ery
2 pcs of 18650 ba7eries
Wake-up Method—Front bu7on or
PIR human body inducon wake-up
Noficaons
Push Speed in 2 Seconds
Wake-up Duraon Within 600ms
Phone
Acve Wake-up
Working current = 250mA
Power Consumpon Standby current = 170uA
MOUNTING THE DOORBELL
Using the back plate as a template, mark the 4 x holes on your wall.
Posion the doorbell in such a locaon such that the lens is facing the
average visitor’s face. With the help of a friend, it’s a good idea to open the
ToSee App and try a few different places / heights to make sure the image/
video capture is ideal.
Drill the 4 x holes using as appropriate size drill bit. Make sure the drill bit is
not too big. The screws or plugs should be nice snug fit.
Use the screws and/or plugs provided to secure the back plate to the wall.
Alternavely, you can use the 3M double sided tape to secure it. Use this
only if you are mounng it on a smooth clean surface.
A0ach the doorbell by lining up the 4 x square lugs. Slide the doorbell down
unl the bo0om is flush.
Use the supplied security screw and allen key to fix the doorbell.