EZPull MTX-8, Руководство по установке, Страница: 8 / 11

EZP_MTX8_AdminGuide.doc FW Version 1.0.0
EZPull MTX-8 Setup Manual
Page 8
Modifying a Target Menu
Before attempting to modify a target menu, it is recommended you write the menu in a table
format (Use a copy of the table form provided in Appendix #2) and work with the table in front
of you. Determine the desired release mode for each pair. The release modes available are:
Release
mode
Symbol When pressing the Fire [  ] key
True Pair
1
+
2
Two targets release simultaneously
Report Pair
1
>
2
First target released. RED light ON steady. Press the fire [

] key
again upon shooters gunshot (report) to throw the second target.
Following Pair
1
~
2
4
First target released. RED light blinks. Second target released
automatically after the number of seconds indicated under the ~
symbol (i.e., 4 seconds)
1. From the Preferences Menu (see above), select the menu number that will be used. Save it
and return to the Setup Options menu.
2. From the Setup Options Menu: Press the [2-B] key to access Target Menu Setup.
3. Press the Enter [
 ] key to start.
4. The number of queues (steps) in the currently selected menu number is displayed.
5. If needed, use the
▲
[3-C] and
▼
[8-H] keys to select the number of queues that will be
used in the modified menu. Typically the number of queues corresponds to the shooting
level:
Level Targets
Number of
queues
1 all singles 5
2 three singles and a pair 4
3 one single and two pairs 3
6. Press the Enter [

] key to continue.
7. You will see the first (top/left) cell in the table.
In the example we show a cell, corresponding with the table
in page 7, with a single trap 2.
7.1.
The left side of the display shows the cell coordinates:
S:1 for stand #1 and Q:1 for queue #1
7.2. The top line of the display shows T1 for 1
st
trap, T2 for 2
nd
trap,
RM for Pair Release Mode and FD for Following-Pair Delay.
The second line shows the values for the items in the first line.
8. To Modify the Trap:
8.1. Press Enter [

] key to enter into a cell.
The title “T1” for the first trap will be highlighted.
8.2. Use the
▼
[8-H] key to change the trap number to #1.
The cell coordinates will become highlighted indicating
a change has been made to the menu.
8.3. Save the changes: the Enter [

] key to save changes and
exit the cell.
S:1 T1 T2 RM FD
Q:1 2 0
S:1 T1 T2 RM FD
Q:1 2 0
S:1 T1 T2 RM FD
Q:1 1 0