Ezon SHS-7020, Руководство пользователя

Страница: 20 / 44

18
Program Mode
The user data can be registered, changed or deleted by entering the code in the
doorlock after making it the Program Mode.
1. Pressing the [Register] Button (from inside)
Open the battery cover of the indoor unit and
press the [Register] button.
2. Entering the Master Password (from outside)
Enter the current master password or
administrator password. Then press the
[
¿ ] button or place the administrator card.
- The unit returns to the normal mode if the
password is not entered within 10 seconds.
3. Terminating the Program
To terminate the program
mode, press the [Register]
button on the indoor unit or
the [Wake Up] button on the
outdoor unit.
Successful: "Too~~t
”
Failed: "Toot~~"
or
In the program mode,
- If LED nos. 1, 2 and 3 flash
→ Program code entry standby mode
- If LED nos. 4, 5 and 6 flash
→
User code or group code entry standby mode
- If LED nos. 7, 8, and flash
→
User data entry standby mode
- To return to the higher menu
→
Press the [ ¿ ] button.
- Please refer to the error code list (page 34) in case an error is generated.
Toot