64
◎
If you use the func tion of hold, you can preve nt a mal-func tion by a button while
the player is pla yed d uring player opera tion, including an unnecessary
consumption of built-in battery.
To Set to HOLD Status
Push the HOLD switc h on the side of the player at the direction of the arrow (HOLD).
The pla yer is locked off with
displayed shown after the display shows “HOLD”.
To Release Hold Status
Move the HOLD switc h to the direction opposite to the arrow.
The hold status is released as there disappears
on the DISPLAY.
HOLD Setting Method
65
◎
If you think the player fails, check the fo llowings:
Power may be not turned on.
•
Check if the battery is properly inserted with correct polarity.
•
Battery may be dead. Replace the battery.
•
Check whether the HOLD switch of the player is set at ON.
(Set it to the direction opposite to the arrow(OFF) if it is set at ON.)
Unrecognizable characters may be shown in the display.
•
Check if the language is properly set in the LANGUAGE menu.
•
Since the ID3 Tag of a song ma y be i ncorrect, you should fix it using such a n
audio player program as Winamp.
Radio station ma kes such a noise as “boooo~” or “Ssaaaa~”, or
its reception is bad.
•
Change the direction of the Player and its earphone.
Please turn the power of the electric appliances OFF near the Player.
If the noise is reduced, use the Player away from them.
•
As an earphone plays a role as an antenna to the player when listening
to the radio station, no earphone may cause a poor reception.
Troubleshooting