manualshive.com logo in svg

EZG EVPC120, Руководство пользователя, Страница: 7 / 16

Поделиться
Скачать
EZG EVPC120 Скачать руководство пользователя страница 7

7

 

 

Revision  Number-005            09-01-2021  -  Present                                      

EZG Manufacturing                 1-800-417-9272             www.ezgmfg.com

PRE-START CHECKS

The following pre-start checks must be performed before the start of each work session or after every four 

hours of use, whichever is first. Please refer to the Service and Maintenance section for detailed guidance. 

If any fault is discovered, the Roller Compactor must not be used until the fault is rectified.

1. 

Thoroughly inspect the machine for signs of damage, Make sure all guards are in place and secured.

2. 

Check hoses, filler openings, drain plugs and other areas for signs of leakage. Fix any leaks before 

 operating.

3. 

Check the engine oil level and top up as necessary. Use proper engine oil with the proper viscosity (SAE 

10W-30 is recommended).

4. 

Check the engine fuel level and top us as necessary. Use clean fuel. The use of contaminated fuel may 

damage the fuel system.

5. 

Check the air filter is clean. Excessive dirt/dust accumulation within the filter element will cause erratic 

engine operation. Clean the air filter element when it is contaminated (refer to the Service and Mainte

-

nance section).

6. 

Check for fuel and oil leaks.

START/STOP PROCEDURE

Before starting the engine, make sure that the Safety Switch is in the ON position and the Throttle Lever is 

set to the idle position. 

1. 

Take the Roller Compactor to where it is required. Use suitable lifting equipment to position the Roller 

Compactor where it is necessary. Make sure the lifting equipment has a WLL (Working Load Limit) suit

-

able for the Roller Compactor weight. Attach suitable slings or chains only to the lifting point.

2. 

Never leave the engine running during transporting, even if it is for a short period of time.

3. 

Having carried out the checks listed in the ‘pre-start’ section, you may start the engine. EZG Pavement 

Compactors are fitted with a centrifugal clutch which allows the engine to run at idle speed without driv

-

ing the Roller Compactor. Centrifugal clutch will be engaged as the speed of engine is increased. For 

correct operation, the engine speed should be set to maximum.

Before Starting Gasoline Engine

4. 

Check the oil in the engine crankcase. Be sure to maintain the proper level per the engine manufacturer 

specifications. If the oil is dirty and in need of changing, follow the Engine User Manual instructions.

5. 

Check the fuel supply. Refer to Engine User Manual.

Содержание EVPC120

















Отзывы:

Нет отзывов