EZER Horus Scope EZ-Horus 40, Руководство пользователя, Страница: 8 / 46

Page 8 of 46
CAUTION:
This device has been tested and found to comply with the limits for medical devices
to the IEC 60601-1-2: 2007.
These limits are designed to provide reasonable protection against harmful
interference in a standard medical installation.
If this device does cause harmful interference to other devices, which can be
determined by turning the system off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving device.
- Increase the separation between the system and other devices.
- Connect the device to an outlet on a circuit different from that to which the
other device(s) are connected.
- Consult the manufacturer or field service technician for help.
The International Electrotechnical Commission sets the essential requirements for
electrical and electronic equipment that may disturb, or be disturbed by, other
equipment. The device complies with these requirements as shown in the tables in
“16. (1) EMC (Electromagnetic Compatibility)” (Page 43-46). Follow the guidance in
the tables for use of the device in an electromagnetic environment.
CAUTION:
During installation and operation of the device, observe the following instructions
about EMC (electromagnetic compatibility):
-Do not use the device simultaneously with other electronic equipment to avoid
electromagnetic interference with the operation of the device.
-Do not use or stack the device near, on, or under other electronic equipment to
avoid electromagnetic interference with the operation of the device.
-Do not use the device in the same room as other electronic equipment such as life-
support equipment, equipment that has major effects on the life of the patient and
results of treatment, or any other measurement or treatment equipment that involves
small electric current.
-Do not use the system with portable and mobile radio frequency communication
systems because that may have an adverse effect on operation of the device.
-Do not use cables or accessories that are not specified for the device because that
may increase the emission of electromagnetic waves from the device and decrease
the immunity of the device to electromagnetic disturbance.
-Do not touch lens connecting pins of control unit, or signal pad of lenses without
special precautions.