General Maintenance and Inspections
Basic maintenance should prevent unnecessary repairs.
Keep Your EZee Elite Scooter Shining
Wipe the seat clean with a damp cloth. Protect the painted parts
with a coat of auto wax.
WARNING: Water or excessive moisture around the controller unit
or electrical connections may cause contamination of electrical
circuitry, damage and malfunction as well as personal injury. Do
not leave your EZee Elite in the rain or in excessively humid
locations.
Daily Checks
With the EZee Elite switched off, check that the hand control lever mechanism
returns to the rest position when you push and release. If
there is a problem do not use the EZee Elite and contact your
authorized dealer.
Weekly Checks
1) Throttle test: Pull the throttle to the full speed position and switch
ON the Power switch. The EZee Elite should not move and the LED
on the panel should flash. If the EZee Elite does move – do not use
your EZee Elite. Contact your authorized dealer.
2) Automatic brake and drive test: This test should be carried out on
a level surface with at least 3’ / 1 m. clear space around the EZee
Elite
a) Switch the EZee Elite on.
b) Move the control lever only slightly in the forward direction until you
hear a “click” when the brake disengages. The EZee Elite should
start to move forward slowly.
c) Immediately release the throttle. You must be able to hear a “click”
when the brake engages back, within a few seconds.
d) Repeat the test in the reverse direction. If you do not hear the
brake operating, or the EZee Elite does not move slowly in the
expected direction – do not use your EZee Elite. Contact your
authorized dealer.
17
