EZee Life CH2100, Руководство пользователя

Страница: 7 / 12

7
⚫
Before Use
⚫
Set Up and Use
1) Set the drive unit with integrated backrest into the bearing blocks of the seat
2) Hold the backrest by the hand grips and using the other hand tilt it backwards
until the drive unit rests against the base plate.
3) Raise the bath lift up until the two side plates are level with and supported by the
sides of the bathtub.
4) Sit on the outside of the side plate and back to the bathtub.
5) Keep on the above pose and then move to the center of the bath chair.
6) Swing your feet into the bathtub.
7) Press the down button on the handset to the needed position and ensure your
hands and feet cannot be hurt in the process.
8) The bath lift will lower to the bottom of the tub before the backrest reclines to 45°
by pressing the down button.
8. When finished, raise the bath lift up until the two side plates are supported on the
edges of the bathtub, then move your feet out of the tub and stand.
9. Remove the bath lift from the tub if required.
1. Before each use ensure that bath lift is operating
normally and is safe for up/down use.
2. If the handset indicator lights, please charge it first.
3. Please ensure that the bath water temperature is not
too hot or too cold.
4. Pressing the handset's up button will raise the seat,
pressing the down button lower the seat, pressing the
stop button will stop the lift.
5. Textured buttons will help users with poor eyesight.
6. After using the stop button press the up or down
button to resume using the bath lift.
7. When lowered completely the bath lift can recline to
45°.
8. When raising the bath lift back adjust from recline to
the upright position before the lift seat rises.