Adjusting the Footrest Length
Using the wrench provided, place it over the bolt and turn to left to
loosen or to the right to tighten in place. Adjust the length by sliding
the footrest up or down so that the person's full thigh is supported by
the seat.
REMEMBER
Footplates need to keep at least a 2” clearance from the
ground to overcome thresholds.
REMEMBER
if the knees are too high the person may get a sore
bottom from increased pressure. If the knees are too low the person
may slide out of the chair
Removing & Replacing Footrests
Swing the footrest to the side by pushing the lever (1) Grasp the top
bar of the footrest and lift up (2), releasing the footrests from the pins.
Repeat on the other side.
Holding the footrest in one hand, from the side align the pins with the
holes in the footrest and attach (3). Swing footrest back in place.
4
