Commode Assembly:
•
Attach the armrests by inserting them into the commode's frame, turn to
tighten the locking screws.
•
Attach the wheels by inserting the caster stem into the commode frame;
attaching the wheels equipped with brakes at the back of the commode
and the non-braked wheels in the front, turn tight the locking screws.
•
Attach the footrests by lowering them onto the footrest pins on the frame
and swinging them into the center until they lock in place.
•
Flip down the foot plates.
•
The footrests can be unlocked by pushing the locking latch found at the
top footrest pin and then swung outwards to remove.
•
The height of footrest can be regulated by unscrewing the locking screw
placed under the foot platform. Having chosen an appropriate height,
tighten the locking screw.
The foot plates should be high enough to
support the feet and lower legs but not so high as to elevate the thighs off
the seat.
•
Install the sanitary bucket under the seat
•
Install the toilet seat and top cover.
Commode Parts:
1)
Flip Back Arm Release
2)
Footrest Release
3)
Flip Up Footplates
4)
Calf Strap
5)
Caster Brakes
6)
Commode Bucket
3
