Operating Instructions
Folding the Chair
The CH1043 Transport chair can be folded for storage and transportation with just a few
easy steps.
1. Pull pins (3) that secure the front of the arms (1) and allow them to drop
down.
2. Release locks (4) on back and fold back down.
3. Fold footplates (5) up and lift footrests (6) all the way up vertically.
4. Lift folding straps (7) to complete folding procedure.
Open (Unfold) the Chair
1. Pull lifting straps (7) apart and push down seat rails until seat
upholstery is taut to unfold chair.
2. Fold backrest up until the fold down locks (4) engage.
3. Lower footrests (6) and flip down footplates (5).
4. Lift arms (1) and position front arm posts into arm brackets (2) and
ensure the locking pin (3) is engaged (Seat upholstery must be taut
for arms to lock properly)
Wheel Locks
Adjusting the Cables
The wheel locks may require adjustment from time to time. This is
normal for any device using wire cables.
To adjust the wheel locks, loosen the wheel lock nut
(8) and turn the cable adjustment screw (9) clockwise
to loosen the brakes and counter-
clockwise to tighten them.
Once adjusted, re-tighten the lock nut being
careful not to allow the adjustment screw to turn.
When adjusted properly, the brake bar (10) should embed into
the tire deep enough to prevent the wheel from turning
when wheel locks are applied.
3
