Ezee Glow Mini Zara, Руководство пользователя

Страница: 8 / 22

8
Due to the many different materials used on different walls, it is highly recommended
that you consult a competent tradesman before you install this appliance on the wall.
A. Select a location that is not prone to moisture and is located at least 36" (914mm)
away from combustible materials such as curtain drapes, furniture, bedding, paper,
etc.
B. Have two people hold the appliance against the wall to determine the final location.
C. Place unit face down on a soft, non-abrasive surface. Remove the wall bracket(s)
from the back of the unit by removing the relevant screws.
D. Mark out bracket(s) location using a spirit level to assist, then mount the bracket(s)
to the wall using the supplied screws. The bracket(s) MUST have the hooks facing
upward.
NOTE: It is strongly recommended that the wall bracket be screwed into wall
studs where possible. If wall studs cannot be used, ensure
t hat eight plastic
anchors are used to affix each bracket to the wall and each bracket is
adequately secured.
E. With the wall bracket(s) installed, lift the appliance, and guide the bracket hooks into
the two (four for XL Zara) slots on the back of the appliance.
F. Check the appliance for stability ensuring that the bracket(s) will not pull free from
the wall. Finally, skip to page 7 and carry out the L-bracket install to finish wall
installation.