ezDISK EZ610S, Руководство пользователя

Страница: 16 / 29

English
15
Changing the unlocking password
1. Connect the Micro B connector of the USB cable to the USB
connector of the hard disk enclosure.
2. Press and hold down button C (Cancel) without releasing.
3. While still holding down button C, connect the other end of the USB
cable to the computer USB host. The green and red LED indicators
should subsequently turn on.
4. The orange LED indicator will blink after 5 seconds and button C
(Cancel) can now be released.
5. Type in the original unlocking password then press button E (Enter).
If the password is correct, the orange indicator will turn off. If the
password is incorrect, the orange indicator will remain on and the
password needs to be typed again.
6. Key in your new password then press button E (Enter). The orange
LED indicator should turn off.
7. Key in the new password again then press button E (Enter).
8. If the two passwords match, the red indicator will turn off and blue
turn on while the green will blink 3 times then stay on. Password
changing is now complete and the system will detect the secure
partition and notify that reading and writing options are now
permitted. If the two passwords don’t match, the orange LED
indicator will turn on while the red will blink twice then remain on.
The process will revert to step 6 and request for password key‐in
again.