6. Spare parts & Accessories
Article No. Name
Spare Part
30100
Commode Pan with Lid
3223010
Arm Locking Pin
4401022
Seat with Opening
4401012
Seat Cushion
4451059
Back Cushion
44050020
Stabilization Brace for Dignity
Classic Bariatric
20128
2 Clips for Stabilization Brace
11.07.080
User Manual
7. Setting up the chair for use
The product is delivered partially pre-assembled.
The following assembly instructions must be carried
out before first-time use:
1.
Turn the footrests forward until they click
into position. Then unfold the foot supports
downward. Finally adjust the height of the
footrests (see: 8.4).
6
3.
Swivel the armrests forward until they reach the
slot of the backrest and click into the locking
pins of the lower frame.
2.
Swivel the armrests to the back, insert the
backrest into the steel tubes of the chair frame
and push it down until it hits the striker of the
lower frame.
8. Using the chair
When using the chair, the following points must
be adhered to:
Before use, it must be assured that the
chair is in a proper condition for safe use.
If necessary, depending on the physical
and strength limitations of the patient
including their ability to move and
muscle strength, sitting down and getting
up should not be done without assistance
from a caregiver. The chair may not be
used for long patient transport times.
8.1 Sitting down
Before sitting down in the chair, be sure it is secured
against slipping away (see: 9.9) and tipping over,
that the armrests are locked into position, that the
shower/commode seat is properly mounted, and that
the footrests are folded away to the side or folded up.
1
4.
The back wheels are always locked for delivery.
Lift up the locking levers to release the wheels.
The patient must stand as close as possible to the
chair, then sit down slowly on the whole seat during
