1-800-323-6598
www.ezonpro.com
INSTALLATION INSTRUCTIONS
1. Locate tether anchor bracket.
* Check vehicle owner’s manual to
locate factory installed tether bracket.
* Instructions for hardware kit are found in
the Tether Kit assembly bag.
2. Attach snap hook of tether mount to
car’s tether anchor.
3. Place the “Y” of tether mount over
back of the seat.
4. Tighten strap by pulling webbing
through tilt lock adjuster.
5. With passenger properly seated (hips
low against back of seat and shoulders
flush to seat). Attach each snap hook at
end of the “Y” to tether slots in shoulder
adjusters.
6. Reduce tether slack by lifting tilt lock
adjuster upward. Slide the webbing to
loosen or tighten.
*
Passenger’s shoulders must be held
tight against back of seat.
7. Thread vehicle belt through vest loops.
8. Buckle belt low on the lap.
1
2
3
4
5
6
7
8
TETHER MOUNT
(For Family Vehicle)
100TM
EZ-ON PRODUCTS
1-800-323-6598
www.ezonpro.com