2. Connect the two Crescent
’
s (b) and (c) with two smaller
bolts on each side. Each of these holes gets a separate bolt, it is
not one long bolt that goes through.
3. Attach 2 additional side support brackets for base (d) using
6 bolts of equal size.
4. Hang Chair from hook point at top of upper section.
CARE
It may be necessary to spray frame occasionally with rust
preventative spray paint to enhance appearance
REMINDER
The frame
IS NOT
intended to swing side to side, spin, twirl
or twist in. Always exit frame front to back and
NOT
sideways.
USE CAUTION.
Disclaimer
Please note: EZ HANG CHAIRS and all agents or
representatives thereof cannot assume responsibility for
special, indirect, or consequential damages or contingent
liability for use of this product in a manner not expressly
intended by the manufacturer. End consumer is ultimately
responsible for verifying proper assembly of C frame.
Regarding any questions about our products please contact
your sales rep. or visit our website.
www.ezhangchairs.com
