17
※
Operation Procedure
:
A. Use the
▲
and
▼
keys on the main menu to select the “Tools” menu.
B. Select "Disk Info" under the "Tools" sub-menu, and press ENT key.
C.
Use the
▲
and
▼
keys to select different hard disk, and press ENT key to view the hard disk related information;
For example, the following figure shows the information of the first hard disk:
7.2.7.2 MAKE UPDATE DISK
Create an upgrade disk for upgrading the duplicator software.
※
Operation procedure:
See "8. System Software Upgrade” Steps (1).
7.2.8 SETTING
The system settings include the duplicator's working parameter settings. Generally, the factory default
settings can be used. If you really need to modify the system settings, be sure to confirm the setting change.
7.2.8.1 CMP AFTER COPY (N)
This option is used to set whether to perform data comparison after copying is completed. If set to "Yes",
the data comparison will be started automatically after the duplicator completes the copy task; if set to "No", the
comparison will not be performed automatically after the copying. The default is "No".
7.2.8.2 SET COPY PERCENT
This option is used in combination with "Percent Copy" and "Percent Compare". You need to set the
required percentage before Percent Copy or Percent Compare.
