You can put in another blank disc and press
YES
to copy another disc or press
NO
button to cancel the operation.
NOTE:
If you are not satisfied with the quality of your finished disc, you should use another type of
disc that matches the recorder or select a lower writing speed to improve the quality of the
recorded disc.
2.2 Test Copy Disc
The Test Copy Disc function is used to check the feasibility of writing data to a blank disc. This
function is almost the same as the Copy Disc function. However, the difference is that data will
not be written to a blank disc. [You should execute this function when source disc has serious
scratches.]
Follow the steps similar to 2.1 Copy Disc:
1.
Place the master disc in DVD-ROM, and Blank disc in DVD-RW drive
2.
Move the cursor to the Test Copy Disc function and press OK
3.
The
Coach
will start to simulate the copying process and check the feasibility of data
writing
Test 4X (15:00)
Total disc length
Audio 4X
Total length elapse
Copyright © 2011 by EZ DUPE, Inc. All Rights Reserved.
2.
Test Copy Disc
